Gas Geyser Repair & Service
Gas geysers are highly energy-efficient but require precise calibration of gas pressure, water pressure, and electrical ignition triggers. Tanishka Gas Geyser experts provide reliable repairs, ensuring hot showers without carbon monoxide risks.
Key Diagnostics Checklists
Brand Compatibility & Genuine Spares
Indian and imported kitchen equipment differ in valve threads, jet sizing, and spark plug cards. We maintain custom spare kits for a wide range of kitchen brands, ensuring quick replacements:
Our Step-by-Step Work Process
Step 1: Intake Diagnostic
Technician tests water pressure flow and evaluates click-start electrical signals.
Step 2: Descaling Heat Exchanger
Mineral deposits and calcium scale are flushed from copper heat pipes to restore efficiency.
Step 3: Burner Cleaning
Gas burner jets are cleared of carbon soot to ensure a clean, smoke-free flame.
Step 4: Safety Cut-Off Check
Overheat thermostat and gas shut-off valves are calibrated to stop gas flow if water stops.
Step 5: Exhaust Validation
Technician checks venting path to confirm carbon monoxide is not venting into living spaces.
On-Site Safety Protocols
Gas lines hold pressurized fuel. To prevent dangerous micro-leaks, our technician executes a mandatory safety checklist before wrapping up the service:
Common Appliance Failures
Geyser Clicks but No Flame
Failed gas flow solenoid valve, weak AA batteries, or blocked gas jets.
Water Temperature is Too Low
Soaking carbon deposits inside heat exchanger fins restricting thermal transfer.
Gas Geyser Popping Noise on Ignition
Delayed ignition trigger causing LPG buildup in combustion chamber before spark.
Safety Advisory
Never install gas geysers inside small, non-ventilated bathrooms. Always mount them in open dry balconies or spaces with continuous fresh air flow.
Recent Job Logs (Pune Suburbs)
Instant Gas Geyser clicking but failing to ignite water burner.
Replaced rusted battery box terminals, fitted a new water-magnetic sensor valve, cleaned burner orifices, and calibrated flame pressure indicators.
Loud popping / blast noise on start from geyser in balcony.
Isolated delayed spark igniter coil, replaced the electronic pulse generator, adjusted ignition electrode clearance distance, and tested burner start safely.
Water flow not triggering spark in gas water geyser.
Cleaned hard-water calcium scale inside the flow-valve, replaced worn-out rubber diaphragm, and tested geyser trigger on low water flow speeds.
Frequently Asked Questions
Q.What causes delayed ignition in gas geysers?
Weak batteries or misaligned spark electrodes fail to spark immediately, letting gas accumulate in the chamber which ignites with a loud pop.
Q.Is a gas geyser safe if installed on a dry balcony?
Yes, dry balconies provide continuous fresh air venting, making it the safest installation choice for gas geysers.
Q.How often should gas geysers be descaled?
In areas of Pune with hard water, descaling should be done once a year to prevent water pressure dropping and heat exchanger blockages.
Q.Why is water temperature fluctuating?
Fluctuations are caused by uneven water inlet pressure or a failing magnetic gas flow valve. Servicing the flow regulator solves this.
Schedule Technician
ActiveSubmit details below to book a technician. Or call us directly at +91 80808 63933.
Technician Helpline Support
For immediate assistance with gas leakage, cylinder setup, or cooking stove issues, call the main desk directly.
Call Support: +91 80808 63933Serving Suburbs & Neighborhoods for Gas Geyser Repair & Service
Check specific arrival landmarks, regional safety advices, and book technicians in your own Pune suburb: